Note
1.
Electronic components are sensitive to dust
and dirt. Do inspect and clean the computer
system regularly.
2.
Turn off the power whenever you install or
remove any connector, memory module and add-on
card. Before turning on the power, make sure that
all the connectors, memory modules and add-on
cards are secured.
3.
After power is on, wait for a minute. The
system BIOS are going through a self-test during
this period and nothing is shown on the screen.
After the self-test, the system BIOS will initialize the
display adaptor and show messages.
4.
The SIMM sockets are fragile device. Do not
force the SIMM modules into the sockets. It may
break the locking latches.
Summary of Contents for BISON II
Page 1: ...BISON II...
