background image

 

 

 
 
 
 

 

 

18 

8. PROGRAMMABLE REMOTE CONTROL 

 
 

 

            

  

 

Select your OCTAVE amplifier on the touch screen panel with button AUX. Once selected you 
can always control the volume directly by pushing the button Vol + or Vol - . 
Detailed information relating the use of the remote control you find in the owner's manual of the 
HOME THEATRE MASTER REMOTE 

 
 

9. USING THE (SUPER) BLACK BOX 

 
 

Description 

 

OCTAVE, with the Black Box technology, offers an instrument to optimizing the OCTAVE amplifier 
in respect to the speaker. This flexibility is a unique feature of the OCTAVE brand.  
The dynamic and tonal stability of an amplifier is strongly dependent upon the stability and capacity 
of the power supply, therefore the Black Box and Super Black Box were developed as external 
upgrades to the OCTAVE amplifiers’ power supply storage capacitors by increasing their capaci-
tance by a factor of 4 (Black Box) or 10 (Super Black Box), respectively. This is a tremendous 
benefit if the speaker is difficult to drive. Loudspeaker efficiency is made less critical, while the am-
plifier is enabled to handle speakers with minimum impedances as low as 2 Ohms.  
The power supply capacitance increase realized via use of the Black Box or Super Black Box stabi-
lizes current delivery and reduces the impedance interaction of the load. This improves dynamic 
range, separation, depth, soundstage size and articulation, rendering the musical reproduction 
clearer throughout the entire frequency range. The amplifier remains unaffected by mains varia-
tions and interferences due to the noise filtering characteristics of the capacitors 

 

 

Device selector OCTAVE code B 
 
 
 
 
 
 
 

 

Volume up 

 

Volume down 

Summary of Contents for V70
























Reviews: