13
4. OPERATION
4.1. RE 320 front panel
Legend
Power switch
0 = off; 1 = on. The Power LED
illuminates that the unit is ON
Input selector
This is used to select the desired input signal.
RCA: RCA
Input
XLR:
Balanced XLR Input, see Chap. 6.5
Muting:
Muting Function of the Input’s, see Chap. 6.4
Power LED
lights up when the Power Switch
is on 1
Muting LED
goes out when the Input Selector Switch
is in position “Muting”
Ecomode
Selector
Eco On:
The Ecomode electronic is activated, the Ecomode LED
lights up in green
and
Eco Off:
The Ecomode electronic is disabled, and simultaneously
the BIAS measuring electronic is Off
Bias
Measurement
Position V1 - V4: The BIAS measuring electronic is connected to the
relevant tubes. To ensure the accuracy of any adjust-
ment, switch On the Muting function
NOTE:
The RE 320 is equipped with a Soft-Start circuit and a Power-Up delay timer.
The amplifier is ready for use after a delay of approximately 2 minutes. Because there are
no relays in the signal path, a low-level, slightly distorted signal from your source equipment
may be heard through your loudspeakers during warm-up. This circuitry extends tube service
life and also protects the power section from voltage spikes and excessive inrush currents.
Summary of Contents for RE 320
Page 1: ...RE 320 Owner s Manual English ...
Page 33: ...34 ...
