19
6. ADVANCED FUNCTIONS
6.6. Setting the damping factor
Attention: before switching the damping factor, please switch off the
MRE 220 SE with the power switch
Procedure
1.
It is best to do the switchover with two people:
Raise the power amplifier at the front (lift the front by approx. 15 cm) and fix the device in this
position
2.
The switching of the damping factor is accessible through the base plate. In the opening you will
see two small slide switches. With the included BIAS screwdriver or another suitable tool, you
can easily move the switches to the desired position.
Both switches must always be in the same position.
DF L (damping factor low), or DF H (damping factor high)
Delivery condition is DF L (damping factor LOW)
Summary of Contents for MRE 220 SE
Page 1: ...MRE 220 SE Owner s Manual English...
Page 3: ...4...
