OPTIONS
Option: Additional line-level input module
22
OPTIONS
Option: Additional line-level input module
The modular design of the
HP 700
offers the option to mount one or two additional line-level inputs
beyond the existing line-level inputs (if the phono option is not installed, which requires at least one
slot).
This can be advantageous if the existing number of inputs its insufficient or the transformer-coupled
IN 8 is to be used for sound or technical reasons.
11.1.1. Assembling the additional line-level input module
1. Remove the cover of the
HP 700
by loosening the screws using the supplied torx pin wrench
and pulling off the cover upwards.
2. Remove the front panel on slot 1 or 2 on the front of the
HP 700
(4 M3 x 10 screws)
3. Make sure that the screws on the connector are all loose. Do not unscrew them completely.
4. Guide the line-level input module through the opening at slot 1 or 2 so to insert the pins on the
pin strip into the terminal screw strip.
LINE input
module
Summary of Contents for HP 700
Page 1: ...HP 700 ...
