Octava HDMXA71-V1.3 Installation Manual Download Page 16

16 

 

 

Warranty 

Octava warrants the equipment purchased to be free from defects in 
material and workmanship under normal use and service for a period of 1 
year. In the event applicable law imposes any implied warranties, the 
implied warranty period is limited to 1 year from the date of receipt. 
If Octava's equipment fails because of defects (1) year from the date of 
receipt, Octava will at its option, A) repair or replace the equipment, or B) 
request return of equipment for refund of the price paid for the product 
provided that the equipment has not been subjected to mechanical, 
electrical or other abuse or modifications. 
Proof of sale required to claim warranty. 

 

Disclaimers 

IN NO EVENT SHALL OCTAVA'S OR ITS SUPPLIER’S LIABILITY FOR 
ANY CLAIM WHATSOEVER EXCEED THE COST OF THE PRODUCTS 
GIVING RISE TO THE CLAIM, WHETHER BASED IN CONTRACT, 
WARRANTY, INDEMNITY OR TORT (INCLUDING, WITHOUT 
LIMITATION, NEGLIGENCE AND STRICT LIABILITY) OR OTHERWISE. 
IN NO EVENT SHALL OCTAVA INC. OR ITS SUPPLIERS BE LIABLE 
FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER 
INDIRECT DAMAGES (INCLUDING, WITHOUT LIMITATION, LOSS OF 
REVENUES, PROFITS OR OPPORTUNITIES), HOWEVER CAUSED, ON 
ANY THEORY OF LIABILITY, WHETHER OR NOT OCTAVA INC HAS 
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 
 
WHILE EVERY PRECAUTION HAS BEEN TAKEN IN THE 
PREPARATION OF THIS MANUAL, OCTAVA ASSUMES   
NO RESPONSIBILITY FOR ERRORS OR OMISSIONS. IN NO 
EVENT WILL OCTAVA ASSUME ANY LIABILITY FOR DAMAGES   
RESULTING FROM THE USE OF THEINFORMATION CONTAINED HEREIN. 
  OCTAVA RESERVES THE RIGHTTO CHANGE THE SPECIFICATIONS,   
FUNCTIONS OR CIRCUITRY OFTHE PRODUCT WITHOUT NOTICE. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for HDMXA71-V1.3


















Reviews: