www.octavainc.com Install Guide: HDLAN | PoE HDMI Over IP
10-8-2018
Ethernet cable recommendations
Using Shielded Cat6A (STP, 24AWG or better) cable will ensure
maximum signal integrity plus optimum rejection of external interference.
Cable Type
Note
1
UTP Cat5e/Cat6 cable Shielded
(STP) Cat6A cable is
recommended. 24 AWG or better
Recommended
U Use EIA/TIA-568-B standard when terminating your LAN cables.
IR Configuration
Connect IR Emitter to IR TX port
Connect IR Receiver to IR RX port
LED Indicator
1
Power LED
Solid Blue when powered
2
Network LED
Normal = solid Green
OFF = not connected. Check LAN cable or
connection to network switch
3
Data LED
Normal = yellow (fast blink)
No Data = slow blink(1/sec)