www.octavainc.com Install Guide: HDLAN | PoE HDMI Over IP
10-8-2018
Installation
Installation Procedure
1
Connect
“
AVLAN
”
port of the
Transmitter and Receiver
with CAT6 cable.
2
Connect HD source to HDMI In of Transmitter unit
3
Connect Display to HDMI Out of Receiver unit
4
Connect IR cables(optional)
6
Connect 5V DC power supply to the transmitter and receiver units.
Note-If PoE Network Switch is used then 5V power supplies are not necessary
If PoE Network switch is used. Do Not connect the 5V power supplies.
7
Verify that the PWR LED and Data LED Indicator are ON.
8
Turn on Source and Display.
Transmitter
Receiver