18
Powering Modes:
The following shows the status of matrix in ON / Standby / Off Mode
Status
ON
Matrix = ON
CAT6 Output (A-H)
= ON
Zone Receivers = ON
Standby
(note2)
Matrix=Standby (low power mode)
CAT6 Output (A-H)
= ON,
Zone Receivers=ON
OFF
(note2)
Matrix=Standby (low power mode)
CAT6 Output (A-H)
= OFF,
Zone Receivers=OFF
Note 2- When matrix is in Standby or OFF mode, the Fan will continue to
run for approximately 3 minutes then the Fan will shut off.
The following shows how to set the matrix to ON / Standby / Off Mode
Front Panel
Buttons
IR Remote
RS-232
ON
Send
IR
command
Send Turn ON
Power command
Standby*
NA
Send
IR
command to matrix via
Zone Receiver
OFF
Send
IR
command to matrix via
front panel IR
Send Turn OFF
Power command
*To exit Standby mode simply turn ON the matrix