![background image](http://html.mh-extra.com/html/octane-fitness/q35/q35_operation-manual_723665020.webp)
0
Unit doesn’t power up
• Is the unit plugged in? Check the connection of the power cord from the
machine to the wall outlet.
• Is there power from the wall? Plug a lamp or radio into the outlet to see if
the wall outlet has power. Does a light switch control the outlet? If so, turn
it on.
• Does the light on the power supply light up?
• If the issue persists, contact your local dealer for service.
Don’t feel a resistance change
• Increase resistance level to 20 and pedal for 30 seconds. If you feel a
difference in the resistance, then the brake is working properly.
• Are the cables connected correctly? Unplug and re-connect the console
(you must remove the console from the console mast to do this). When
re-connecting the cables, make sure you feel the connector snap into place
or hear a click that indicates a proper connection.
• If the issue persists, contact your local dealer for service.
Console blinks on / off
• Check the power cord connections. Make sure the connections are secure
from the transformer into the machine base and also the wall outlet.
• The console connection could potentially be faulty. Unplug and re-connect
the console (you must remove the console from the console mast to do this).
When re-connecting the cables, make sure you feel the connector snap into
place or hear a click that indicates a proper connection.
• If the issue persists, contact your local dealer for service.
Machine enters pause mode
after a short period
• This is most likely a speed sensor issue; contact your local dealer for
service.
LED lights are always on
• Press and hold the Pause/Clear button for five seconds to enter sleep
mode.
LED always toggling
• Press the Enter button to stop the LED screen from toggling.
t r O u B l e s H O O t i n G /
F a Q s
electronic issues
Summary of Contents for Q35
