ENG-2
ENGLISH
Remove plastic insert from inside shroud;
discard insert.
Re-attach lower left shrouds with #2
Phillips screwdriver and 8 screws
removed in step 1.
Repeat
-
for right side.
Enable CROSS CiRCUIT Pro programs:
On a standard console:
• Press and hold
for three-five
seconds, or until you hear a beep.
• Press + until “CROSS CIRCUIT” is
displayed, then press
Enter
to
change setting to “ON”.
• Press + again until “EXIT” is
displayed, then press
Enter
to save your selection.
On a smart console:
• On the Home screen, touch
the upper left corner, then
the upper right corner
two times
,
then the upper left corner again,
then enter the password
SETT (7388)
on the pop-up keypad.
• On the Machine Settings page,
select “ON” or “LIMITED EXERCISE
SPACE” from the CROSS CiRCUIT
dropdown menu, the touch “Save
& Exit” in the lower right corner to
return to the Home screen.
Enter
Program
Workout
Quick Start
PAUSE
CLEAR
(#2 Phillips)
Outside
Left
(3 screws)
Inside
Left
(5 screws)
