ENG-1
ENGLISH
CROSS CiRCUIT PRO KIT for ZR8000
™
100924-001
(5 mm)
102712-001
101029-001
Kit Contents
Assembly Instructions
Use #2 Phillips screwdriver to remove
screws (Quantity 8) securing lower left
outside and inside shrouds. Set aside
outside shroud; slide inside shroud
toward center and rest it on the rear
step.
Fasten weight stand to mounting plate
with bolt A (Quantity 3) and washer B
(Quantity 3); tighten securely using 6mm
hex wrench.
6 mm
(#2 Phillips)
Outside
Left
(3 screws)
Inside
Left
(5 screws)
Tools Required
Right Side Weight Stand
Left Side Weight Stand
110987-001
110988-001
Assembly and
Set-up Instructions
111027-001
6 mm hex key wrench (included) or ratchet with 6mm hex bit
#2 Phillips screwdriver
Hardware Kit
111025-001
ASSEMBLY & SETUP INSTRUCTIONS
CROSS CiRCUIT PRO KIT
