Octagon XE-900, Reference Manual

Page: 16 / 122

16
Hardware reset
A hardware reset ensures complete reset of the system and all attached
peripherals. A hardware reset can be done by any of the following methods:

An expired watchdog timer cycle

Depressing the reset switch

Cycling power

Power supervisor reset
5 Volt only operation lowers system cost

5V ±5%

±12V supplied to PC/104 connector from the power connector; not required for
XE–900 SBC operation

+3.3V and +12V supplied to PC/104 -Plus connector from the power connector;
not required for XE–900 SBC operation
Rugged environmental operation

Operating temperature –40° to +60°C @ 400 MHz
–40° to +60°C @ 733 MHz, with forced air flow
–40° to +60°C @ 1 GHz, with forced air flow
These operating specifications also apply to units with the Integrated
Conductive Cooling System.

Nonoperating temperature –55° to 85°C, nonoperating

Relative humidity 5% to 95% noncondensing

Shock 40g, 3 axis

Vibration 5g, 3 axis
Size
115 mm x 165 mm x 29.5 mm, EPIC™ form factor (board)
171.45 mm x 184.15 mm x 38.96 mm (with Integrated Conductive Cooling System)