Octagon SF 1028P HD - Noblence, User Manual

Page: 49 / 84

49
3.3 Service Search
You can select the following search mode.
3.3.1 Satellite Search
 Auto Search Mode :
-
Satellite :
Press the
OK
button to select the target satellite
to be searched.
-
Tuner :
Select tuner what you want to set
(Tuner 1/ Tuner 2).
If you set
‘Loop-Through’
on the menu
(Installation-Dish
Setting-Tuner Connection),
this menu (Tuner) will be
automatically disabled.
-
Search Type :
Select the search type.
-
Network Search :
You can select
‘Off’
or
‘On’.
When you
select
‘On’,
you can find more transponders using the
home network. As it refers to NIT during searching, if there is
the frequency information of other transponder, it searches the other transponder besides the
transponder that the user inputs.
-
Time Calibration :
You can select
‘Simple’, ‘Full’
and
‘Off’
to get TDT(Time Data Table) from each
TP
-
Dish Setting :
Press the
OK
button to move to Dish Setting menu directly.
-
Positioner Setting :
Press the
OK
button to move to the Positioner Setting menu directly.
-
Start Search :
Press the
OK
button to start search.
 Manual Search Mode :
-
Satellite :
Press the
OK
button to select the target satellite
for search.
-
Tuner :
Select tuner what you want to set
(Tuner 1/ Tuner 2).
If you set
‘Loop-Through’
on the menu
(Installation-Dish
Setting-Tuner Connection),
this menu (Tuner) will be
automatically disabled.
-
Frequency :
Select the frequency from the list to search.
-
Symbol rate :
Enter the symbol rate using the
NUMERIC
buttons.
-
Polarity :
Select the polarity.
(Vertical/Horizontal)
-
Search Type :
Select the search type.
-
Network Search :
You can select
‘Off’
or
‘On’.
When you select
‘On’,
you can find more
transponders using the home network. As it refers to NIT during searching, if there is the frequency
information of other transponder, it searches the other transponder besides the transponder that
the user inputs.
-
Dish Setting :
Press the
OK
button to move to Dish Setting menu directly.
-
Transmission :
You can select
‘DVB’
and
‘DVB-S2’.
-
Start Search :
Press the
OK
button to start search.