2430 Super VGA Video Card – 8
WARNING:
The 2430 SVGA Video Card contains static–
sensitive CMOS components. The greatest danger
occurs when the card is plugged into another card.
The 2430 card becomes charged by the user, and
the static discharges to the system. To avoid
damaging your card and its components:
1.
Ground yourself before handling the 2430 card.
2.
Disconnect power before removing or inserting
the card.
Take care to correctly position the 2430 card onto
the card that it is being installed on.
2.
The 2430 is factory configured and programmed for a VGA
analog monitor (W1[1–2] BIOS enable). If you are using a
different monitor or flat panel display, you must reprogram the
video BIOS for the appropriate display. See “Programming the
2430 EEPROM.”
3.
With the components on the 2430 facing upward, insert the pins
beneath the card into the PC/104 connector of the CPU card.
4.
Power on your system.
5.
Refer to Figure 2 for a functional diagram of the 2430 card.
