2430 Super VGA Video Card – 11
7.
To program the 2430 for the appropriate monitor/display, type
the following:
<drive>:PGMVIDEO <drive>:STNDD.DAT
The <drive> designator is the read/write drive where you
transferred the files from your PC. The *.DAT file should be
changed to reflect the type of display you are using.
8.
Enter 'Y' when asked if you want to proceed. The program
PGMVIDEO then updates the video BIOS on the 2430. The
system displays a message similar to the following:
Video BIOS programming utility
------------------------------------------------
PGMVIDEO Vers x.x.x Copyright(c) 1992-6 Octagon Systems Corp.
------------------------------------------------
You must reboot after running this program.
Make sure the jumper labeled EN–DIS is at the EN
position.
Do you want to continue? (Y/[N])
Programming...Please wait..................
Verifying...Please wait....................
PGMVIDEO completed.
9.
Power off the 2430 and install your monitor/display.
CONNECTING THE MONITOR/DISPLAY
The 2430 supports both a CRT monitor or a flat panel display. The
programs CT.COM and FP.COM allow you to toggle between
displaying the monitor and the flat panel. The program SM.COM
allows you to display from the monitor and some types of flat panels
simultaneously. These programs are found on the VGA 65540
Utilities Disk along with other diagnostic and configuration utilities.
The 2430 CRT Adapter Assembly is ordered separately. The kit
(P/N 4000) includes an adapter card with a DB-15 connector, two
stand-offs, two screws and two nuts. This adapter mates to the 2430
via J1, allowing connection to standard analog monitors.
