6.3.3 Automatic code search
The automatic code search can take several minutes. Therefore use this
method only if none of the other methods worked.
The automatic code search, searches through the TV codes for ALL TV brands.
1. Switch on your TV set
2. Press and hold down the and buttons simultaneously for at least 3
seconds.
The red LED is lit.
3. Press the button, and then the button.
If the TV set is switched off, the TV code is correct. Switch the TV set back
on and try out other buttons to see if they work correctly.
If the TV does not respond to the command, repeat step 3 until the TV is
switched off or the other buttons work correctly.
Pressing the button terminates programming without saving.
4. Press the button to confirm the TV code.
The red LED flashes twice in quick succession.
6.4 Controlling the TV
Which remote control buttons are compatible with your TV depends on the
buttons of the original remote control for your TV.
After programming a valid code, you can control your TV set. Press and hold the
button, and then press the desired button to control your TV set.
P510E IP | 17
Summary of Contents for P510E IP
Page 12: ...6 1 Button functions Figure 9 Button functions 12 P510E IP...
Page 26: ...Notes P510E IP 26...
Page 27: ...Notes P510E IP 27...