Step 1
Use the appropriate screws for your type of
installation to attach the mounting bracket
which must be installed for anti-tip safety to the
bottom support at the back. See placement
dimensions in the illustration at right.
Installation Instructions
Installation of Anti-tip device
The lower rear corners of the cabinet need to provide proper support to the back of the Warming
Drawer and the anti-tip mounting bracket. A 120 volt AC outlet should be located no further than 36 inch-
es from the back center of the Warming Drawer.
Warming Drawer Installation
Preparation
The bottom section of the cabinet should be
made of material with adequate strength to sup-
port the weight of the Warming Drawer(80lbs)
and needs to be installed to hold the anti-tip
mounting bracket.
Step 2
Take note of the Warming Drawer mounting slot
on the back side where it will slide onto the anti-
tip mounting bracket.
Plug power cord into installer provided AC
power outlet.
5
