background image

Summary of Contents for WD24

Page 1: ... Cut out Dimensions INSTALLING THE WARMING DRAWER The opening ha the wall or cabinet should be A wide x B high x C deep minimum as shown in Table 1 Install two support brackets provided 8 from the front of the wall or cabinet at the same level as the bottom of the opening See Fig 1 Push unit into opening until it clears support brack ets and supports its own weight Push unit tight against wall or ...

Page 2: ...ligation of the installer or user to have the existing receptacle changed to a properly grounded and polarized receptacle in accordance with all applicable local codes and ordinances by a quali fied electrician In the absence of local codes and ordinances the receptacle replacement shall be in accordance with the National Electrical Code THE THIRD GROUND PRONG SHOULD NOT UNDER ANY CIRCUMSTANCES BE...

Page 3: ... the wood panel to the support using two wood screw s through the handle mounting holes into the pilot holes on the back side of the wood panel Re assemble this support assembly to the drawer replacing the six screws Then install the drawer back into the slides as noted in the Care Use Manual The custom wood panel must have all four edges finished be cause they are exposed The back of the wood mus...

Page 4: ...eThermador indicating the model number Thermador reservesthe rightto change specifications or designwithout notice Some models are certified for use inCanada Thermador isnot responsib e for products which _re transportedfrom the United Statesfor use inCanada Check with your local Canadian distributor or dealer Thermador SSSI McFadden Avenue Huntington Beach CA 92649 C UL LISTED 157 JF_LED E521958 ...

Reviews: