background image

OCENAV ATM105A1N/2/3,  ATM200 

 

exponentially  averaged  to  improve  precision  and  facilitate 
reading. (HDG, STW, AWA, AWS, TWA, TWS, TWD, COG, SOG, 
Depth ...) 
-  Optional  extension  with  atmospheric  pressure,  cabin 
temperature  and  relative  humidity  transducers.  The 
ATM200  model  is  originally  equipped  with  a  9-axis 
gyrocompass  with  autocalibration,  internal  GPS  and 
meteorological sensors. 
 

1.4-

 

Output data Filtering: 

 

Unlike  other  existing  gateways  on  the  market,  the 
ATM105A1N / 2/3 and ATM200  establish a rotating output 
sequence  that  is  optimal  to  avoid  both  overflow  and  to 
ensure that all data is sent in a short space of time. time over 
slow NMEA0183 channels. (no more than 1 sec). 
These  Ocenav  gateways  limit  the  frequency  of  repetitive 
type  sentences  (Heading  or  COG  /  SOG,  for  example) 
received  from  NMEA2000  between  1  and  4  per  second 
depending  on  their  priority,  since  it  is  a  very  fast  bus 
(250,000 bps). 
There  is  no  such  limitation  for  security  sentences  (AIS  / 
Marpa). 
Each  channel  has  its  data  output  filtered  with  its 
corresponding  input,  eliminating  redundancy.  In  this  way, 
the data traffic is reduced to the minimum possible, because 
only those that are not available on that channel are sent. In 
addition, dangerous data loops are eliminated. 

 

 

Summary of Contents for ATM105A1N





















Reviews: