- Connecting NMEA 0183 inputs and outputs, all channels:
Connection to a instrument with differential input/output (RS422)
Connecting to a instrument with single pole input/output (RS232)
(Leave without connecting the ATM105A output O-)
- Connecting NMEA2000:
Connect the equipment to a power voltage drop or branch available by
several manufacturers (Garmin, Lowrance, etc), or an adapter cable
NMEA2000 / Seatalk (ng) Raymarine, or by type connector Brad
Micro-Charge (M12) BINDER series or 763. Do not ever connect
directly to the main bus. The ATM105A3 has a very low consumption
from NMEA2000 (90mA - LEN = 2). When the gateway connects to
NMEA2000, there is no need to connect power to the front 5-pin
connector (Power/anchor).