Document UT-MT-0428
Page 31 of 35
Edition 11/03/2014
Supersedes edition 04/30/2012
INSET RUNWAY EDGE LIGHT SLRE
INSTRUCTION MANUAL FOR USE, INSTALLATION AND MAINTENANCE
Figure 22 - Relamping
4.7
GASKETS
4.7.1
Gasket examination
Every time a fixture is opened each O-Ring must be examined as described below and
replaced if necessary.
Any O-Ring that is stretched, torn, has a permanent set or some other defect, which
would prevent it from obtaining a water-tight seal must be replaced with a new O-
Ring.
Remove the fixture from the base and open it following instructions of
“Removing
and Opening the Light Unit From the Base”
.
Light assembly is equipped with the following gaskets:
O-Ring between dome and lower cover (Figure 1- n°20);
O-Ring around the dome (Figure 13 - n°1);
O-Ring between fixture and 12” shallow base (Figure 13 - n°3);
prism gasket mounted between prism and dome (Figure 23 - n°2).
2.
Figure 10 – Prism Gasket
