Oceanpower OPF130, Manual

Page: 12 / 29

2.1 Room conditions
The room used for the operation of the OPF soft ice cream machine must be able to
provide air that can circulate freely, to prevent over-heating. Therefore the distance to the
machine must be at least 200 mm to the closest wall. The space were the machine is
located should be kept clean, in order to prevent dust or other particles to be sucked into
the machine by its fan.
The place where the machine stands should be firm and dry and there should not be any
heat sources within 500 mm to the machine.
NOTE: If the minimum room condition is not followed, it may affect the operation of the
machine and its output capacity.
Picture 5: the machines placement Picture 6: the machines safety breaks
2.2 Electrical connection
It is of great importance that the power supply to the machine is within the permitted
range 198V~242V, with a current capacity above 16 A, also that the machine can be
properly grounded. If the voltage should be outside the permitted range, then the machine
safety protection will prevent the machine to start and the machine need to be restarted.
The cross-section area of the cable that is connecting the machine with its power source
should be over 2.5mm
2
and the length shorter than 6m.
Warning: if the power cable should of any reason be damaged, a skilled technician with
sufficient knowledge and skill should immediately replace it.
Warning: Always ensure that socket of the power source is properly grounded before
connecting the machine.
2.3 Safety breaks
To be able to move the machine freely, it has been equipped with wheels with mechanical
breaks. During operation the wheel breaks should be engaged to prevent the machine to
move.
12