3
IMPORTANT PRECAUTIONS!
!
ATTENTION INSTALLER
:
This manual contains important information about the installation,
operation and safe use of this product. This information should be given to the owner and/ or operator of
this equipment.
Risk Group 2
C
CAUTION
:
Possibly hazardous optical radiation emitted from this product. Do not stare at
operating lamp. May be harmful to the eye.
CLASS 3
:
This equipment is designed to operate at voltages of less than 50v DC.
!
DANGER!
Risk of electrical shock or electrocution!
This underwater light must be installed by a Licensed Marine Electrician in accordance with ABYC
(American Boat and Yacht Council), NMMA, and any other applicable codes and ordinances. Improper
installation will create an electrical hazard which could result in death or serious injury to swimmers,
installers, or others due to electrical shock, and may also cause damage to property. Always
disconnect the power to the light at the circuit breaker before servicing the light. Failure to do so
could result in death or serious injury to serviceman, swimmers or others due to electrical shock.
!
WARNING:
Before installing your OceanLED light, read and follow all warning notices and instructions
which are included. Failure to follow safety warnings and instructions can result in property damage, severe
injury, or even death.
!
WARNING:
Before installing your OceanLED light, check local laws for restrictions regarding the use of
colored lights in your area.
!
WARNING:
Salt is an inherently corrosive material. Metal parts and certain natural and man-made
surfaces are particularly susceptible to corrosion and deterioration when used in and around salt water.
OceanLED Amphibian Xtreme lights are polymer and marine grade stainless steel products that are
impervious to salt water corrosion. However, screws and fasteners used for the installation must be of
a marine grade type stainless steel or equivalent and monitored annually to ensure the lights remain in
service for years to come.
!
WARNING:
(Metal & carbon fibre hull's only).
If mounting the light to metal or carbon fibre surface,
ensure that suitable measures have been put in place to account for the effects of galvanic corrosion
i.e. mount suitable insulating material to the surface and then mount the light to the insulating material
ensuring no electrical paths between the surface and light are present.
!
WARNING:
Not suitable for use as on docks, piers or pilings.
See our Dock Light products.
-
