Oceanic OCS, Operating Manual

Page: 12 / 62

12
OCS OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5272-r01 (9/28/11)
WATCH MAIN (DEFAULT) TIME
Main (Default) Time is the Time that is displayed on the Watch until changed. It is also the Time viewed during operation in DC
(Dive Computer) Modes.
Main Time is the current Time at your home location and is normally selected as the Watch Default Time.
Alternate Time, set by Hour Differential, is the current Time at a remote travel location. Upon arrival at the location, Alternate
Time can be interchanged with Main Time to make it the Default Time while visiting the travel location.
Setting Time of Day and Alternate Time, and selection of the Default Time are functions in the Watch Set Time Menu.
Once Alternate Time is set, by Hour Differential, it will automatically change when Time of Day is set/changed. When Alternate
Time is selected to be the Watch Default Time (while at a travel location), it will change directly when Time of Day is changed
and Main (home) Time will then change by a differential opposite the one set for Alternate Time.
M (2 sec), or no button action during 2 minutes, while in any Watch sub routine, will revert to the Watch Default Time screen.
Main (Default) Time, information includes (Fig. 5):
> Time of Day (hr:min:sec), Home (or Alternate if selected) with A or P if 12 hour format.
> Graphic CDT with countdown time (hr:min), when set On.
> Graphic ALT, if Alternate Time is selected as Default.
> Day of Week graphic MON, TUE, WED, THU, FRI, SAT, or SUN.
> Month.Day (or Day.Month).
> Time (clock) icon.
> Battery icon, if a Low Battery.
> Alarm (speaker) icon, if Daily Alarm is set On.
> TLBG, if any after NORM/FREE dives.
• A (< 2 sec) - to access Watch ALTs.
• M (< 2 sec) - to access Watch Menu.
• M (2 sec) - to access DC (Dive Computer) Mode.
• S (< 2 sec) - to silence Daily Alarm.
• S (2 sec) - to access Compass.
• L (press) - to activate Backlight.
Alt 1, information includes (Fig. 6):
> Time of Day (hr:min:sec), Alternate (or Home if selected).
> Graphic ALT, blank if Home Time is displayed.
> Day of Week graphic MON, TUE, WED, THU, FRI, SAT, or SUN.
> Month.Day (or Day.Month).
> Battery icon, if a Low Battery.
> Alarm (speaker) icon, if Daily Alarm is set On.
> TLBG with NI icon, if any after NORM/FREE dives.
• A (< 2 sec) - to access ALT 2.
• 5 sec - reverts to Watch Default if A is not pressed.
• L (press) - to activate Backlight.
Alt 2,
information includes (Fig. 7):
> Altitude graphic EL2 (to EL 7), blank if Sea level.
> Temperature with ° icon and graphic F (or C).
• 5 sec, or A (< 2 sec) - revert to Watch Default.
• L (press) - to activate Backlight.
WATCH MENU
M (< 2 sec) - to access Menu, while viewing Default Time.
A (< 2 sec) - to step down (forward) through selections.
M (< 2 sec) - to step up (backward) through selections.
S (< 2 sec) - to access selection indicated by Arrow icon ( > ).
M or S (2 sec) - to revert to Default Time.
CDT (Countdown Timer) STATUS
Upon access, the following is displayed (Fig. 8/9) -
> Graphics CD TMR solid with OFF (or ON) flashing.
> Countdown Time (hr:min). If OFF, 0:00 or the CDT time if previously set. If ON, the remaining time (hr:min).
• A (< 2 sec) - to step through selections OFF, ON, and SET.
• S (< 2 sec) - to save the selection that is flashing.
>> If OFF is selected, operation reverts to the Menu with no CDT displayed.
>> If ON is selected, operation reverts to the Menu with the time set displayed and counting down.
>> If SET is selected (Fig. 10), Set CD Timer is accessed.
Fig. 5 - MAIN TIME
Fig. 6 - WATCH ALT 1
Fig. 7 - WATCH ALT 2
Fig. 9 - CDT STATUS
(if On upon access)
Fig. 10 - CDT STATUS
(to access Set, or set/ready)
Fig. 8 - CDT STATUS
(if Off upon access)
A
B
if set
On