Oceanic OCEACC198WF, Instruction Booklet

Page: 37 / 41

Problem Possible cause Solution
Appliance dose not
work
Mains plug is not plugged in or
is loose
Insert mains plug.
Fuse has blown or is defective Check fuse, replace if necessary.
Socket is defective
Mains malfunctions are to be
corrected by an electrician.
Appliance freezes too
much
Temperature is set too cold or
the appliance runs at “7"
setting.
Turn the temperature regulator to
a warmer setting temporarily.
The food is not
frozen enough
Temperature is not properly
adjusted. Please look in the initial
Temperature Setting section.
Door was open for an extended
period. Open the door only as long as
necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
Turn the temperature regulation to
a colder setting temporarily.
The appliance is near a heat
source. Please look in the installation
location section.
Heavy build-up of
frost on the door
seal.
Door seal is not air-tight.
Carefully warm the leaking sections
of the door seal with a hair dryer
(on a cool setting). At the same
time shape the warmed door seal
by hand such that it sits correctly.
Unusual noises
Appliance is not level.
Check the appliance and level it by
some articles.
The appliance is touching the
wall or other objects.
Move the appliance slightly.
A component, e.g. a pipe, in
the side of the appliance is
touching another part of the
appliance or the wall.
If necessary, carefully bend the
component out of the way.
Caution!
Before troubleshooting, disconnect the power supply. Only a qualified electrician
of competent person must do the troubleshooting that is not in this manual.
Important!
There are some sounds during normal use (compressor, refrigerant
circulation).
'DLO\8VH
3 5