Oceanic GEO, Operating Manual

Page: 37 / 75

37
GEO AIR OPERATING MANUAL
© Oceanic, 2022 Doc. No. 12-5673-r05 (10/11/22)
SELECT
ADV
.
LIGHT
MODE
G. END PRESS (PRESSURE) ALARM
To emphazise a low gas situation, the End Pressure Alarm allows you to set an alarm for when you reach a designated end
pressure. Dependat on metric or imperial units, the default setting is 50 bar or 800 psi.
NOTE: The End Pressure Alarm only considers the active gas when diving with multiple gas trans-
mitters.
SELECT
ADV
.
LIGHT
MODE
flashing
TURN ALARM TRIGGERED
decrease
value
increase
value
300 to 1500 PSI
(20 to 105 BAR)
to select
to step back
3. SAFETY STOP
The Safety Stop feature can be set ON, OFF, or rt (run timer). If ON is selected, you may choose from an available 3 or 5 min Safety Stop
at depths of 10, 15, or 20 ft (3, 4, 5, or 6 m). If rt (run timer) is selected, a manual timer will be available instead of the automatic Safety
Stop count down.
SELECT
ADV
.
LIGHT
MODE
toggle setting
to select
OFF, ON, or rt
SET SAFETY STOP
SELECT
ADV
.
LIGHT
MODE
decrease
value
increase
value
to select
3
00
or 5
00
(min
sec
)
SET SAFETY STOP TIME
decrease
value
increase
value
to select
10, 15, or 20 ft
(3, 4, 5, or 6 m)
SET SAFETY STOP DEPTH
to step back
to step back
to step back