Oceanic GEO 4.0, Operating Manual

Page: 15 / 66

15
GEO 4.0 OPERATING MANUAL
© Pelagic, 2019 Doc. No. 12-5670-r01 (2/27/18)
CHRONOGRAPH
The chronograph has a 9 lap memory. After 9, subsequent laps will be recorded and the earliest lap discarded.
If the Chrono continues to run and reaches 9:59:59.99, it will stop and record that as a Lap. Subsequent presses of SELECT then have no effect.
SELECT
ADV
.
LIGHT
MODE
stop timer,
recall laps
1 - 9
save lap
1 - 9
SELECT
ADV
.
LIGHT
MODE
reset timer
exit to
Watch
Main
centiseconds
lap # (1-9)
after 4.99 seconds,
centiseconds display
as - -
SELECT
ADV
.
LIGHT
MODE
CHRONOGRAPH LEAD-IN
access
Chronograph
status
CHRONOGRAPH STATUS
(< 5 seconds)
hr:min:sec
CHRONOGRAPH STATUS
(≥ 5 seconds)
NOTE: If the Chrono continues to run and reaches 9:59:59.99, it will stop and record that as a Lap. Subsequent presses of SELECT
then have no effect.
NOTE: Once the Chronograph has been set and started, it will remain on and displayed (or continue to run in the background)
while on the surface until reset by the user. Upon descending to 1.5 M/5 FT (i.e., entry into a Norm, Gauge, or Free Mode dive),
operation will be terminated and the counter will reset to 0:00:00.00 (hr:min:sec.centisecond).