Oceanic DataMax Pro, Owner'S Manual

Page: 20 / 80

16
®
DataMax
PRO
®
N
O
D
E
C
O
M
C Z
. . 10 FT S
T O
P
20
F
T
3
0
500 0 4000 3000
T
I
M
E
T
A
N
K
A
S
C
E
N
T
4
0
#
#
LOG
LOG
DEPTH
DEPTH
MAX
MAX
BOTTOM
BOTTOM
FT
FT
will start the Automatic Dive Log Sequence. This mode displays information
of up to nine dives from your most recent day of diving. Dive Log Mode will
retain this information indefinitely until descent past five feet on your next
dive after twelve hours, or until the battery is removed - in either case, the
log's memory of previous dives will be cleared. Dive Log Mode can be recog-
nized by the Mode Label “LOG” in the top of the display. This mode has a
multiplexing display with each logged dive having two “screens.”
The first screen will display Dive #, Maximum Depth (noted by Mode
Labels “DEPTH MAX FT”), and total Bottom Time (underneath the Mode
Label “BOTTOM”). It will also show the TLBG reading that was recorded at
the end of the dive, and the maximum ascent rate value reached in the VARI.
In the second screen, the Surface Interval between the indicated dive and
the previous one replaces the bottom time display. If the dive shown in the
log display was the only one of the day, Surface Time will represent the time
between initial activation and the beginning of the first dive.
The Dive Log Mode recalls dives from the last recorded to the first, so
your first dive will always be the last shown in the log sequence. When
accessing Dive Log Mode, you can choose to either press and release, or press
and hold, the button on the face of the DataMax Pro. Pressing and releasing
the button initiates the Automatic Dive Log Sequence. This sequence will
scroll through previous dives showing each “screen” for about four seconds.
Pressing and holding the button will freeze the information on the
display giving you a chance to write it down in your logbook (A sample
Fig. 14 – Dive Log Mode
Primary Screen
a.