IMPORTANT SAFETY NOTES:
1. Make sure to follow the fixture and HQI
ballast connection instructions in their
entirety. Failure to follow these directions
may damage ballast and/or cause failure.
2. Turn off all switches and unplug all power
cords from power outlet(s).
Do not plug
power cords into power outlets until
fixture installation and setup is complete.
Ballast Setup (Figure B7)
1. Locate double-ended HQI metal halide
lamp connector on unit.
2. Make sure that the double-ended HQI metal
halide ballast is unplugged and switch is in
the "off" position.
3. Align the male pins on the double-ended
HQI metal halide lamp connector with
the female pin inlets on the double-ended
HQI metal halide ballast connector
and connect.
IMPORTANT! Make sure that
the lamp connector is fully seated into the
ballast connector.
Mounting HQI Ballast (Figure B8)
THIS STEP IS OPTIONAL
1. Slide out ballast-mounting bracket.
2. Place metal washer between screw and
ballast mounting bracket. Tighten screw
until secure (mounting hardware not
included).
Cooling Fan Setup (Figure B9)
1. Locate cooling fan connector on fixture.
2. Attach cooling fan connector to cooling
fan adaptor.
BALLAST AND COOLING FAN SETUP
MALE
FEMALE
Double-ended
HQI Metal Halide
Lamp Connector
Double-ended
HQI Metal Halide
Ballast Connector
Ballast
Mounting
Hardware
Cooling Fan
Connector
Cooling Fan
Adaptor
FIGURE B7
FIGURE B8
FIGURE B9
SAFETY:
1. Turn off switch, unplug ballast power
cord and allow fixture to cool down
before handling.
2. Do not let the top lighting hood come into
direct contact with water.
Extension Adjustment (Figure B4)
1. Loosen extension adjustment knob.
2. Adjust extension arm to desired position.
3. Hand tighten extension adjustment knob
firmly.
Make sure that the fixture is
tightened securely in place.
Height Adjustment (Figure B5)
1. Loosen height adjustment knob until
extension arm moves freely.
2. Adjust top lighting hood to desired position.
3. Hand tighten height adjustment knob firmly.
Make sure that the fixture is tightened
securely in place.
Angle Adjustment (Figure B6)
1. Loosen angle adjustment knobs.
2. Adjust top lighting hood to desired position.
3. Hand tighten angle adjustment knobs firmly.
Make sure that the fixture is tightened
securely in place.
AQUALIGHT ADJUSTMENTS
Extension Adjustment
Height Adjustment
Angle Adjustment
FIGURE B4
FIGURE B5
FIGURE B6
22
23
