Sauna & Steam
Oceanic Saunas 01902 450 550 [email protected] www.oceanic-saunas.co.uk
9
Apollo Steam OSX
8.2. Fixing the guard to the heater
• Carefully remove one of the screws holding the cover trim in place (No. 1 - 3 on fig 2d)
• Slide one of the brackets beneath the cover trim so that the hole in the bracket lines up with the
holes from the screw you have just removed.
• Fix the bracket in place with the same screw
• Repeat for the remaining brackets.
• Place the guard ontop of the brackets and use a 1mm drill bit to pilot the holes into the bottom
of the guard before fixing into place with the small screws provided.
Angled Bracket
Cover trim
Guard
Fixing Screw
1
2
3
Flat Bracket
The 640mm length timber should be fixed to the
sauna wall using 40mm screws and the dowel
plugs at the same height as the guard.
This rail can be trimmed down if you prefer but
it will need to be 640mm if installed across a
glazed panel from our Vision Range saunas.
Fix the guard to the wall rail using the 2No
flat brackets and 35mm screws provided from
beneath
Fig2d. Guard Installation
Fig2e. Guard Rail
Fig2f. Flat Bracket
