GENERAL DESCRIPTION
Air Conditioners are designed for applications where outside air is not available and spot cooling is
needed. The cord connected AquaCooler Models range from 13,780 BTU/HR to 60,100 BTU/HR floor
mount configuration to satisfy any space requirements. All models are provided with casters for
portability.
These models are thoroughly self-contained with the entire refrigeration system, water valve,
condensate pump, fan motor and electrical components neatly arranged in a platinum texture polyester
powder coated metal cabinet. Only power, condenser water supply and discharge and condensate drain
piping are required for installation.The 24 volt programmable electronic controller, provides the desired
comfort. The high counterflow efficiency design of the water-cooled condenser operation allows proper
amount of water flow to achieve the desired high and low refrigeration system pressures. Condenser
water is regulated by a refrigeration system head pressure actuated water regulating valve.
GENERAL REQUIREMENTS
A MINIMUM WATER PRESSURE OF 20 PSIG IS REQUIRED to actuate the water regulating valve
and allow water to flow into the condenser coil. The condenser water temperature leaving the unit
should not exceed 112° F. Ignoring this compliance will void the warranty on the refrigeration system.
IMPORTANT
AquaCooler
Air Conditioners are designed and engineered for the comfort of the
end user. The length of service received can be extended by following the installation and preventive
maintenance instructions. It is important that the warranty card be filled out completely and returned to
the factory within fourteen (14) days of installation of the unit in order to receive the benefits of the
warranty.
UNIT MODEL CAPACITIES
12780 BTU/HR COOLING
18840 BTU/HR COOLING
23950 BTU/HR COOLING
36100 BTU/HR COOLING
60,300 BTU/HR COOLING
