10
CHECKOUT OF UNIT OPERATION
POWER BUTTON:
Press the
power button
once to toggle the unit to the on mode. Press the power button
again to toggle the unit to the off mode.
FAN BUTTON:
Press and release the
fan button
to advance from auto to manual fan. Press and
release to increase the manual fan speeds, 1
through 6. Press and release again returns to the
auto fan mode. The selected fan mode is indicated
by the Auto and Manual fan LED’s.
UP BUTTON:
Momentarily press and the set
point will appear in the temperature display. The
set point increases one degree each time the up
button is pressed and released.
DOWN BUTTON:
Momentarily press and
release to display the set point. The set point is
decreased one degree each time the button is pressed and released.
MODE BUTTON:
The
Mode Button
is used to select one of 2 Operating Modes. Press and release to
advance to the next mode. Continue to press and release until the desired Operating Mode is reached. The
mode selected is indicated by the Mode LED.
TEMP SELECT BUTTON:
Press and release to view inside (supply) air temperature, discharge air
temperature or set point. The appropriate LED will be lit indicating which temperature is displayed.
THREE DIGIT DISPLAY:
The inside (supply) temperature is displayed whenever the control is turned
on. The display provides a readout of the inside air temperature which is located in the supply airflow.
COOL MODE LED:
The Cool Mode LED is lit when Cooling is selected.
MOISTURE CONTROL LED:
The Moisture LED is lit when the Moisture Control is selected.
MANUAL FAN LED:
The Manual Fan LED is lit when a manual fan speed is selected.
AUTO FAN LED:
The Auto Fan LED is lit when automatic fan speed operation is selected.
FAN SPEED BAR GRAPH:
There are six(6) individual fan speed LED’s. Each LED represents one (1)
fan speed. Low fan (1) is indicated by illuminating the first LED. High fan speed is indicated by
illuminating all six (6) LED’s.
LED:
The system operating status (Compressor On or Off) is indicated by turning On the right most
decimal point in the 3 Digit Display.
INSIDE
OUTSIDE
SETPOINT
