Component replacement and adjustment procedure
7.4
Convection fan motor substitution
1.
Disconnect the power supply cord and remove the Oven from the cabinet.
2.
Remove the rear cover.
3.
Remove the fan cover from the cavity (two screws, see pic.).
4.
Remove the fan blade pulling it or removing the 10mm fixing nut, depends on model.
5.
Disconnect the terminals on the fan in the rear side.
6.
Remove the motor rotating it clockwise or on some other models removing the three fixing screws (see
pic.) on the motor holder and remove it.
7.
Mount the new fan motor on the holder then mount the fan blade into the cavity.
8.
Reassemble the fan cover into the cavity.
9.
Connect the terminals on the motor.
10.
The connections must not be loose.
11.
Reassemble the rear cover and reinstall the Oven into the cabinet.
12.
Reconnect the power supply cord after the Oven is installed.
13.
Run the Oven and check all functions.
A
B
14 di 30