Ocean TV
Ocean Series Antennas
OCEAN TV
16
www.oceantv.com.au
Changing Channels
If you have followed the installation instructions, your system should be set to the satellite of
your choice and the system should have downloaded the appropriate channel guides. When the
O37M /O45M antenna system and satellite receiver is properly configured, it is easy to change he
channel using the remote control that normally comes with the receiver unit.
Watching TV
The O37/45M antenna is designed to operate as efficiently and as reliably as possible when the
vessel is moved and anchored. It is also the quickest satellite acquisition system available among
the O37/45M antennas. If you have anchored the vessel and the antenna has completed to search-
ing
selected
satellite,
turn
off
IDU
Power
to
avoid
unnecessary
use of
power.
Because the LNB receives its power from the Satellite Receiver through the IDU, the antenna
will continue to receive the satellite TV signals.
Switching between Satellites
You can switch between satellites using the IDU by pressing Satellite select buttons. Follow the
steps below to switch to another satellite.
1.
Ensure that the LCD screen of the IDU is displayed.
Figure 3-1 IDU LCD Screen
2. Press the Satellite select buttons to switch to another satellite.
3. The antenna shifts to track selected satellite. Wait for the Tracking Satellite
screen to reappear with the ID of selected satellite displayed.
Australia Systems are setup for Optus Satellites C1 and D3 as standard.
Optus C1 and D3 are for use with Foxtel, Austar, Optus Aurora, VAST
Intelsat 8 is for Select TV (No longer Available in Austalia)
New Zealand Systems are setup for Optus D1
Optus D1 are for use with FreeView NZ and Sky NZ
OPTUS C 1/D3 ID: OPT
AUTO _SLP
S : 280
