Connecting a Digital Video Deck or Camera
3.
Step
Description
Connect the capture board to the
optional Client monitor.
Connect the Client monitor with either an
RCA cable (step 3a)
or
S-Video cable (step
3b).
3a
Connect an RCA cable to the Out1 port
on the capture board.
Attach the other end of the cable to the
Client monitor.
Provides composite analog video from the
Out1 port, looped from the In1 port
connection, to the Client monitor. You can
see the incoming video during the record
process and when you play a clip, as
explained in step 2a.
Connect a cable with an S-Video
connector to the Out2 port on the
capture board.
Attach the other end of the cable to the
Client monitor.
3b
Same as step 3a except the signal uses the
In2 and Out2 ports.
Page 6
Tower Setup Guide
