Connecting a Digital Video Deck or Camera
2.
Step
Description
Connect the analog video from the digital
deck or camera to the capture board.
Connect the analog signal with either an
RCA cable (step 2a)
or
an S-Video cable
(step 2b). Perform step 2a
or
step 2b, not
both.
2a
Connect an RCA-to-RCA cable from the
camera to the in1 port on the capture
board.
Provides a composite analog signal from
the hardware codec of the camera to the
In1 port on the capture board. The signal is
looped to the Out1 port and used as a
composite output of the capture board to
the client monitor (your TV or NTSC moni-
tor).
2b
Connect an S-Video-to-S-Video cable
from the camera to the in2 port on the
capture board.
Same as step 2a except the signal uses the
In2 and Out2 ports.
Page 5
Tower Setup Guide