Battery Pack User Guide March 2020 P.5
Closing the Battery Pack
12.
Clean the O-Rings and ensure they are seated properly and not damaged.
(See
13.
If you are redeploying the battery pack, check the anode (see
14.
Return the inner assembly into the pressure housing with handles in open position.
15.
Push down firmly until the end cap is fully seated to secure the inner assembly in
place. The handles should be able to close into place with ease.
16.
Confirm if your model has a vent plug or pressure relief valve and follow the
appropriate steps below.
IF MODEL HAS A VENT PLUG
a.
Close the vent plug for deployment.
Ensure the vent plug is in the closed position and fully
seated against the face of the end cap (as seen below).
The Vent Plug can be adjusted with the use of a flat head screwdriver or a coin.
Vent Plug
: OPEN
Vent Plug:
CLOSED
IF MODEL HAS A PRESSURE RELIEF VALVE
b.
Do NOT adjust the Pressure Relief Valve.
Manual venting is not required.
A
pressure relief valve will automatically vent
to protect against accidental overpressure
from battery outgassing.
Pressure Relief Valve
Do not adjust.
