M105Digital w/battery level tester
|
M105D MARINER
|
oct. 2007 | rel 1.0
10
Section 4
4.1| Maintenance
Although the M105 Digital is a rugged design it should be treated like any good quality
electronic instrument. Avoid transportation in modes that would expose the unit to
constant vibrations and knocking about. Ship the unit well packaged and
DO NOT
ship
with the battery installed.
After use, wipe the unit free of dirt, debris and/or water. Use a clean, soft cloth.
Warm water with a small amount of nonabrasive soap is the recommended cleaning
solution.
The transducer should be kept clean and free of oils.
The transducer itself can be cleaned with rubbing alcohol.
The transducer assembly should be stored in a separate container if wet after a dive.
Store the hand-held microphone in a dry area.
The microphone is not water- proof and should be kept as dry as possible. Keep it free
of water or from water spray. Mild soap solution and wiped dry is the preferred
cleaning method.
Inspect battery periodically to ensure it is in good order .
When the M105 Digital is not being used, it is a good idea to keep the cover security
fastened.
Remember, when the transducer assembly is connected to the M105 Digital,
the power
is ON if switch is ON too
.
