Troubleshooting
USB2000 Operating Instructions
14
4 Troubleshooting
The following sections contain information on troubleshooting issues you may encounter when using the
USB2000 Spectrometer.
Note
: For issues encountered when using a palm-sized PC, consult the OOIPS2000 manual.
USB2000 Connected to PC Prior to OOIBase32 Installation
If you connect your Ocean Optics USB or PCI device to the computer prior to installing your Ocean Optics
software application, you may encounter installation issues that you must correct before your Ocean Optics
device will operate properly.
Follow the applicable steps in this document to remove the incorrectly installed device, device driver, and
installation files.
Note
: If these procedures do not correct your device driver problem, you will need to obtain the “Correcting
Device Driver Issues” document from the Ocean Optics website. Visit the following web address:
http://www.oceanoptics.com/technical/engineering/correctingdevicedriverissues.pdf
Remove the Unknown Device from Windows Device Manager
1. Open Windows Device Manager as follows:
Windows 98/ME:
•
Go to the desktop and right-click on
My Computer.
•
Select
Properties
from the pop-up menu.
•
Click on the
Device Manager
tab.
Windows 2000/XP:
•
Click
Start | Settings | Control Panel | System.
•
Select the
Hardware
tab.
•
Click on the
Device Manager
button.
2. Locate
the
Other Devices
option and expand the
Other Devices
selection by clicking on the "
+
" sign to
the immediate left.
Note
: Improperly installed USB devices can also appear under the Universal Serial Bus Controller
option. Be sure to check this location if you cannot locate the unknown device.
Summary of Contents for USB2000
Page 2: ......
