Operating OMX-SW8x8NT Matrix Switchers
12
7 Operating OMX-SW8x8NT
Matrix Switchers
Operate your
OMX-SW8x8NT
via:
The front panel buttons
RS-232/ RS-485 serial commands transmitted by a touch screen system,
PC or other serial controller
7.1 Displaying Unit Characteristics
The
OMX-SW8x8NT
7-segment
Display shows the selected audio
1
or video
2
input switched to the marked output.
The unit characteristics
3
are displayed in the following circumstances:
Immediately (and automatically) after switching on the power; and
When simultaneously pressing and holding for 3 seconds the “IN”
buttons
1, 2 and 3
7.2 Selecting and Connecting an Output and/or Input
To select an output or input, press the designated button on the front panel. These
buttons correspond to the output connections marked on the rear panel.
To connect a video / audio input to a specific output, press the desired
output button, followed by the desired input button
To disconnect a video / audio input from a specific output, press the
desired output button followed by the OFF button. To disconnect all the
outputs, press the ALL button, followed by the OFF button
To connect a video / audio input to all outputs, press the ALL button
followed by the INPUT button corresponding to the input which is to be
routed to all the outputs
1 When the Audio button illuminates, that is, when the audio breakaway mode is selected
2 When the Video button illuminates, that is, when the video breakaway mode is selected
3 Machine model and software version
Summary of Contents for OMX-SW8X8NT
Page 1: ...OMX SW8x8NT ...
