Ocean Matrix OMX-SW6x1B, Instruction Manual

Page: 7 / 21

Your OMX-SW6x1B 6x1 Vertical Interval Switcher
4
Table 1: Front Panel OMX-SW6x1B 6x1 Vertical Interval Switcher Features
# Feature Function
1 Power Switch Illuminated switch supplying power to the unit
2 IN Buttons
1
Select the input to switch to the output (from 1 to 6)
3 Internal Cable EQ. Trimmer Internally located and accessed through hole on the underside
2
of
the machine . It allows, if required, cable equalization adjustment
4 Internal LEVEL Trimmer Internally located and accessed through hole on the underside
2
of
the machine . It allows, if required, output level adjustment
Table 2: Rear Panel OMX-SW6x1B 6x1 Vertical Interval Switcher Features
# Feature Function
5 Ext. Sync BNC Connector Connect to the external sync/composite video source
6 IN BNC Connectors Connect to the composite or single component
3
video sources
7 AUDIO L IN-1-6 Terminal
Block Connectors
Connect the left stereo audio input signals (from 1 to 6)
8 OUT Left Terminal Block
Connector
Connect to the left channel audio output
9 RS-485 Terminal Block Port For bi-directional communication with another switcher or PC via
the RS-485 interface
10 AUDIO R IN-1-6 Terminal
Block Connectors
Connect the right stereo audio input signals (from 1 to 6)
11 OUT BNC Connector Connect to video acceptor
12 To NEXT DB 9 port Used for looping to the next switcher
13 REMOTE DB 15 port Used for remote contact closure control
14 To PC DB 9 port Connects to the PC or other serial controller
15 SETUP Dipswitches Dipswitches for setting the machine #
16 OUT Right Terminal Block
Connector
Connect to the right channel audio output (three left pins; the three
right pins are not used)
17 Power Connector with Fuse AC connector enabling power supply to the unit
1 Selected button illuminates
2 Insert a screwdriver into the small hole and carefully rotate it, trimming the appropriate level
3 See section 7.4