4
Ocean Matrix
www.oceanmatrix.com
Ocean Matrix OMX-HDMI-2-IPV2 Installation
SETTING CHANNELS MANUALLY
To manually set the channel of the transmitter and the receiver, use the buttons on either side of each display.
TRANSMITTER
RECEIVER
Press a button to set the value from 0 to 9. A button to the left of the number changes that value and the button
to the right of a number changes that value. Each value is set separately. Each display can be set from 00 to 99.
To connect a transmitter and a receiver, set the TX Connected on the receiver to the same value displayed on the
TX ID screen on the transmitter.
NOTES:
1. The RX-ID feature on the receiver does not function in order to increase network performance and reliability
and to enable the ability to set 99 channel sources from independent transmitter units with virtually an
unlimited quantity of receivers.
2. Limiting factors of network bandwidth and infrastructure may impact total quantity of sources and destinations.
3. There will be no firmware updates to reinstate the RX ID functionality.
