No
Name
Function description
1
RS232
Connect to a PC or control system via a 3-pin phoenix connector cable for
the following functions: 1, Control the Splitter via RS-232 commands; 2,
RS-232 signal pass-through (from transmitter to receiver or from receiver to
transmitter)
2
IR IN
Connect to IR receiver cable, the IR receive signal will emit to “IR OUT” port
of the HDBaseT Receiver
3
IR out
Connect to IR blaster cable, the IR emit signal is from “IR IN” port of the
HDBaseT Receiver
4
AUDIO OUT (COAX, L/R & Phoenix Connector)
Coaxial/balanced audio output port, connect to amplifer or speaker
5
POWER switch
Press this switch to power on/off the device
6
EDID DIP switch
Used to set EDID mode
7
HDMI port
IN: HDMI input port, connect to HDMI source device such as DVD or set-
top box with an HDMI cable
LOOP OUT: HDMI loop output port, connect to the HDMI display device
such as TV or Monitor with an HDMI cable
8
HDBT OUTPUTport (1~4)
Connect to the HDBT IN port of the HDBaseT receiver with a CAT cable
9
Indicator lamp (Green)
lluminated: Transmitter and receiver are connected / Dark: Transmitter and
receiver are not connected
10
Data Signal Indicator lamp (Orange)
Illuminate: There is signal transmission between the transmitter and the
receiver, dark: No signal transmission
11
Power Supply Input
DC 24V Power supply input
Operation Controls and Functions:
