Using the OMX-5009A 3x1 VGA/Audio Switcher
5
5.2 Connecting the REMOTE Connector
You can force the routing of one of the 3 inputs to the VGA/UXGA and
balanced stereo audio outputs by remote control.
To do so, momentarily connect the appropriate
1
REMOTE terminal block
connector PIN to the REMOTE terminal block connector Ground PIN (see the
illustration in Figure 3). The appropriate front panel push button illuminates as
the selected input routes to both outputs.
DO NOT
:
Interconnect PIN 1, PIN 2 or PIN 3
Connect more than one PIN to the Ground PIN at the same time
Figure 3: Connecting the REMOTE Connector
1 To route Input 1, connect PIN 1 to the Ground PIN. To route Input 2, connect PIN 2 to the Ground PIN. To route Input 3,
connect PIN 3 to the Ground PIN
Summary of Contents for OMX-5009A
Page 1: ...OMX 5009A...
