background image

Ocean Matrix 

812 Kings Highway 

Saugerties NY 12477 

 

www.oceanmatrix.com 

              SAFETY 

PRECAUTIONS 

 

 

 

1.  To prevent fire or shock hazard, do not expose this equipment to high  

humidity and/or dust. Do not use in an unprotected outdoor installation 
nor any area classified as overly damp or wet. 

2.  The temperature for installation should be kept between 32°F to 140°F  

(0°C to 60°C). Avoid direct sunlight exposure or extreme changes of  
temperature over a short period of time. 

3.  Do not disassemble the unit or place it on an unstable base. 

4.  Do not drop the unit and avoid heavy impact. 

5.  This unit should not be permanently installed unless proper ventilation is 

provided. Any enclosure openings must not be blocked or covered as they 
protect the unit from overheating. 

6.  Before cleaning, turn off the power and unplug the unit from all connec-

tions. Use a damp cloth. Do not use liquid cleaners nor aerosol cleaners. 

7.  Do not overload outlets and extension cords as this may result in a risk of 

fire or electric shock. 

8.  Enclosure entry is dangerous. Never push objects of any kind, including 

liquids, into this unit through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or electric shock. 

9.  Do not attempt to open or service this unit yourself as opening or removing 

covers may expose you to dangerous voltage and other hazards. 

10. 

There are no user-serviceable parts inside the unit. If the unit requires  
service contact your authorized dealer, or an authorized repair service 
company.

 

Summary of Contents for OMX-3GSDI-CAT5







Reviews: