Turn on
You can choose to have the backlight remains ON all the time by choosing this
option "Turn on". Set your desired backlight level here.
Backlight in Standby
The backlight in standby will be same as the backlight level you set in the Power
Saving option. If you want to dim it further, you have to set it to a lower level under
the Power Saving option.
Display
You can choose the display in color or monochrome style.
Power Management
This function is to allow the radio to go Standby if there is no internet signal
received in certain time period to save power. The default setting is 15 minutes.
When the radio does not receive any internet signal, the radio will go into Standby
after 15 minutes. Other options like 5 minutes and 30 minutes are also available.
Sleep Timer
You can set the timer to turn the radio to standby mode after a certain time period,
from 15 minutes to 180 minutes in steps of 15 minutes.
Buffer
Sometimes you may experience uneven playback of the internet radio. This can
happen if the internet connection is slow or network congestion occurs. To improve
the situation, you can choose longer buffer time to get a few seconds of radio
stream before beginning to play. The default value is 2 seconds. You can choose 4
or 8 seconds if you prefer to have a longer buffering time.
Weather
The radio will display weather information in standby by default. You can select the
regions and temperature unit. You can turn it off by selecting “
Show on Standby >
Off
”.
DAB/FM Setup
FM Mode
Option to choose hearing in Stereo or mono.
Note: As the radio is a mono, this option does not apply.
FM Threshold
Option to adjust the scanning threshold to pick up stronger or weaker FM stations.
There are two types of threshold, Seek Threshold and Stereo Threshold. A stereo
separation adjustment is provided in the FM receiver for lowering the separation
level of the left and right signals and approaching the mono reception to reduce the
noise when the received signal strength of the FM signal is weak, When the signal
strength is strong, the separation level is increased to automatically receive stereo
reception. If the “Strong” option is selected, only the radio stations with good
separate level will be received (in stereo). On the contrary, if “Weak” option is
selected, radio stations with low separation level will be received (in mono).
- 16 -
Configuration
