The radio is defaulted with
<DHCP>
for your network. If your network is not using DHCP
configuration, please choose
[Manual config]
to do it manually by entering your network IP
address, Network Mask, Gateway address and DNS address.
Note: If you are not sure if your network is using DHCP or not, please contact your ISP to
verify.
PBC Wlan setup
If your wireless network router is using the WPS configuration, you can select this option to do
the connection.
View setting
This is to view your current network setting of your radio.
Wlan region
To select the Wlan region for your radio.
Manual Settings
You can select Wired or Wireless internet connection.
Network Profile
The radio can save up to 4 wireless network setting. You can view the networks and delete
unwanted network.
Hold "Info/Menu" back to the main menu,the "System settings" allows you to configure the
settings for the radio as below:
<Equaliser>
User can set the radio with different EQs, such as Normal, Classic, Jazz, Pop,Rock and Speec,
and user can set "My EQ" according to their preference.
<Time/ Date>
You can always set the Time and Date by choosing this option.
<Language>
There are 11 languages available to display on your radio.
<Factory reset>
A factory reset resets all user settings to default values, so time/date, network configuration
and presets are lost. However, the radio's current software version is maintained, as is
registration with the Internet radio portal. Internet radio favorites therefore remain unless you
re-register your radio with another account on the portal website.
<Software update>
From time to time, we may make software upgrades available with bug fixes and/or additional
features. You can either check manually, or set the radio to check periodically automatically
(this is the default). If it detects that newer software is available, it will ask if you want to go
ahead with an update. If you agree, the new software is then downloaded and installed. After a
software upgrade, all user settings are maintained.
Before starting a software upgrade, ensure that the radio is plugged into a stable mains power
connection.
<Setup Wizard>
Choosing this option will guide you to run the network setup from the beginning
<Info>
This is to show the software version and Radio ID for your radio
This information is useful for you when you need to report any technical issues to the help
centre, you will be asked for these information.
Netweork
wizard
Press
to
scan
for
all
the
available
Wifi
networks
7