Then you need to enter the encryption password to access the wireless router, they are the
Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA).
To enter the code, rotate the <Dial/Select> knob to select each character of the code in turn.
To select the character, push down the <Select> button to confirm. If you want to make
correction, scroll to the tab BKSP to erase the character that you just entered. Once it is
completed, rotate the dial knob to the OK tab then push down the <Select> button to save the
key.
The radio will start connecting to the network:
If the connection is successful, the following screen will appear.
If connection is failed, the radio returns to the password entry screen.
If the network connection is lost, the radio automatically tries to reconnect.
Setting of the Radio
After the wireless network is connected successfully, it will enter the main menu automatically.
Go to System Setting to do other setting of your radio:
<Network>
Internet Wizard
To scan out the available wireless network, you can select your wireless network to connect
according to the steps described above. You can select
[Wired]
from the menu as below, to
connect Internet through Wired connection. Please ensure the LAN cable has been connected
to the Ethernet port at the back of the radio
Then select Wired on the menu below:
6
BKSP
OK
CANCEL
Key:
P@s5 W
0 1 2 3 4 5 6 7 8 9 . , a b
c d e f g h i j k l m n o p q
r s t u v w x y z A B C D E F
GHIJKLMNOPQSRTU
Network settings
Please wait
Connecting.
Connected
System Settings
Network
Time Date
Language
Factory reset
Software update
SSID
ARISAWA
LINKSYS
[Rescan]
[Wired]
[Manual config]