Ocean Digital WR-280S, User Manual

Page: 12 / 24

You can listen to the ordinary FM radios without internet connection.
Extend the telescopic antenna or in other direction / length of the antenna may be
required to optimize the reception level.
Choose the FM from the main menu or use the
< > button on the remote to find to
FM mode.
To auto scan the next available FM station, press and hold the
<Left> or <Right>
button for 2 seconds, the radio will seek the next available station. If you want to
fine tune the frequency, rotate the
<Dial/Select> knob on the unit or press the ▲ /
▼ button on the remote control.
Auto preset scan
There is an option to auto preset the FM station. Press the <Dial/Select>
knob (or Select button on the remote), it will ask you whether to Auto Scan or
not. Choose "Yes" and press <Select> to confirm, and it will start scanning
and preset the station. When it is finished, press the
<Preset> button ( on
the remote) and it will display the first preset station.
The preset can be superseded by a new station anytime.
Service Following
This is a feature to help finding the same channel over internet provided that the
radio station has an internet stream available and it is suitable to play on the radio.
Listening over internet radio allows free of noises which usually caused by
interference or weak reception over FM.
After the scan is done on FM, choose a channel to play. If the same channel is
available on Internet, there will be an icon appeared as follow:
Press and hold the
<Dial/Select> knob (or <Select> button on remote), it will switch
to the internet radio mode to play the corresponding channel.
It can store up to 99 presets.
FM mode
- 09 -